I as-well use NetRadiant for mapping, so I downloaded GtkRadiant 1.6.4 to see where the problem might be.
GtkRadiant 1.6.4
Radiant crashed after opening, importing, loading the map as prefab, without console log
GtkRadiant 1.5.0
Map opening process failed, but at least the program remained stable. The console gave me following error message:
.\patch.cpp:186
assertion failure: patch too wide
----------------
Stacktrace is disabled in release-builds
----------------
15731:2: parse error at '(': expected ')'
brush 1635: parse error
entity 0: parse error
Text-editor
Searched for “brush 1635”
// brush 1635
{
patchDef2
{
tech1soc_mat/mat5c
( 23 3 0 0 0 )
(
( ( 5064 2000 1104 0 0 ) ( 5064 2000 1128 0 -0.1875 ) ( 5072 2000 1144 0 -0.3272542357 ) )
( ( 5064 1648 1104 2.75 0 ) ( 5064 1648 1128 2.75 -0.1875 ) ( 5072 1648 1144 2.75 -0.3272542357 ) )
( ( 5064 1472 1104 4.125 0 ) ( 5064 1472 1128 4.125 -0.1875 ) ( 5072 1488 1144 4.125 -0.3272542357 ) )
( ( 5104 1432 1104 4.5669417381 0 ) ( 5104 1432 1128 4.5669417381 -0.1875 ) ( 5112 1448 1144 4.5669417381 -0.3272542357 ) )
( ( 5136 1400 1104 4.9204950333 0 ) ( 5136 1400 1128 4.9204950333 -0.1875 ) ( 5144 1416 1144 4.9204950333 -0.3272542357 ) )
( ( 5176 1400 1104 5.2329950333 0 ) ( 5176 1400 1128 5.2329950333 -0.1875 ) ( 5176 1416 1144 5.2329950333 -0.3272542357 ) )
( ( 5224 1400 1104 5.6079950333 0 ) ( 5224 1400 1128 5.6079950333 -0.1875 ) ( 5224 1416 1144 5.6079950333 -0.3272542357 ) )
( ( 5256 1408 1104 5.8656892776 0 ) ( 5256 1408 1128 5.8656892776 -0.1875 ) ( 5256 1424 1144 5.8656892776 -0.3272542357 ) )
( ( 5288 1416 1104 6.123383522 0 ) ( 5288 1416 1128 6.123383522 -0.1875 ) ( 5288 1432 1144 6.123383522 -0.3272542357 ) )
( ( 5320 1440 1104 6.435883522 0 ) ( 5320 1440 1128 6.435883522 -0.1875 ) ( 5320 1456 1144 6.435883522 -0.3272542357 ) )
( ( 5352 1464 1104 6.748383522 0 ) ( 5352 1464 1128 6.748383522 -0.1875 ) ( 5352 1480 1144 6.748383522 -0.3272542357 ) )
( ( 5416 1464 1104 7.248383522 0 ) ( 5416 1464 1128 7.248383522 -0.1875 ) ( 5416 1480 1144 7.248383522 -0.3272542357 ) )
( ( 5480 1464 1104 7.748383522 0 ) ( 5480 1464 1128 7.748383522 -0.1875 ) ( 5480 1480 1144 7.748383522 -0.3272542357 ) )
( ( 5512 1440 1104 8.060883522 0 ) ( 5512 1440 1128 8.060883522 -0.1875 ) ( 5512 1456 1144 8.060883522 -0.3272542357 ) )
( ( 5544 1416 1104 8.373383522 0 ) ( 5544 1416 1128 8.373383522 -0.1875 ) ( 5544 1432 1144 8.373383522 -0.3272542357 ) )
( ( 5576 1408 1104 8.6310777664 0 ) ( 5576 1408 1128 8.6310777664 -0.1875 ) ( 5576 1424 1144 8.6310777664 -0.3272542357 ) )
( ( 5608 1400 1104 8.8887720108 0 ) ( 5608 1400 1128 8.8887720108 -0.1875 ) ( 5608 1416 1144 8.8887720108 -0.3272542357 ) )
( ( 5656 1400 1104 9.2637720108 0 ) ( 5656 1400 1128 9.2637720108 -0.1875 ) ( 5656 1416 1144 9.2637720108 -0.3272542357 ) )
( ( 5696 1400 1104 9.5762720108 0 ) ( 5696 1400 1128 9.5762720108 -0.1875 ) ( 5688 1416 1144 9.5762720108 -0.3272542357 ) )
( ( 5728 1432 1104 9.9298248291 0 ) ( 5728 1432 1128 9.9298248291 -0.1875 ) ( 5720 1448 1144 9.9298248291 -0.3272542357 ) )
( ( 5768 1472 1104 10.3717670441 0 ) ( 5768 1472 1128 10.3717670441 -0.1875 ) ( 5760 1488 1144 10.3717670441 -0.3272542357 ) )
( ( 5768 1648 1104 11.7467670441 0 ) ( 5768 1648 1128 11.7467670441 -0.1875 ) ( 5760 1648 1144 11.7467670441 -0.3272542357 ) )
( ( 5768 2000 1104 14.4967670441 0 ) ( 5768 2000 1128 14.4967670441 -0.1875 ) ( 5760 2000 1144 14.4967670441 -0.3272542357 ) )
)
}
}
Turns out it is a patch that GtkRadiant can’t display so I copied “brush 1633” which is a ‘normal’ patch
// brush 1633
{
patchDef2
{
tech1soc_trim/s128-02a
( 3 5 0 0 0 )
(
( ( 5144 1552 1160 0 0 ) ( 5144 1584 1160 0 0.25 ) ( 5176 1584 1160 0 0.5 ) ( 5208 1584 1160 0 0.75 ) ( 5208 1552 1160 0 1 ) )
( ( 5144 1552 1160 0.5 0 ) ( 5144 1552 1160 0.5 0.25 ) ( 5176 1552 1176 0.5 0.5 ) ( 5208 1552 1160 0.5 0.75 ) ( 5208 1552 1160 0.5 1 ) )
( ( 5144 1552 1160 1 0 ) ( 5144 1520 1160 1 0.25 ) ( 5176 1520 1160 1 0.5 ) ( 5208 1520 1160 1 0.75 ) ( 5208 1552 1160 1 1 ) )
)
}
}
GtkRadiant 1.5.0
Opened the modified mapfile again. I received the following error:
.\patch.cpp:186
assertion failure: patch too wide
----------------
Stacktrace is disabled in release-builds
----------------
15731:2: parse error at '(': expected ')'
brush 1721: parse error
entity 0: parse error
Text-editor
Turns out to be the exact same problem
// brush 1721
{
patchDef2
{
pdh_wall/bunker_top
( 23 3 0 0 0 )
(
( ( 5064 2000 1048 0 0 ) ( 5064 2000 1076 0 -0.109375 ) ( 5064 2000 1104 0 -0.21875 ) )
( ( 5064 1648 1048 1.375 0 ) ( 5064 1648 1076 1.375 -0.109375 ) ( 5064 1648 1104 1.375 -0.21875 ) )
( ( 5064 1472 1048 2.0625 0 ) ( 5064 1472 1076 2.0625 -0.109375 ) ( 5064 1472 1104 2.0625 -0.21875 ) )
( ( 5104 1432 1048 2.2834708691 0 ) ( 5104 1432 1076 2.2834708691 -0.109375 ) ( 5104 1432 1104 2.2834708691 -0.21875 ) )
( ( 5136 1400 1048 2.4602475166 0 ) ( 5136 1400 1076 2.4602475166 -0.109375 ) ( 5136 1400 1104 2.4602475166 -0.21875 ) )
( ( 5176 1400 1048 2.6164975166 0 ) ( 5176 1400 1076 2.6164975166 -0.109375 ) ( 5176 1400 1104 2.6164975166 -0.21875 ) )
( ( 5224 1400 1048 2.8039975166 0 ) ( 5224 1400 1076 2.8039975166 -0.109375 ) ( 5224 1400 1104 2.8039975166 -0.21875 ) )
( ( 5256 1408 1048 2.9328446388 0 ) ( 5256 1408 1076 2.9328446388 -0.109375 ) ( 5256 1408 1104 2.9328446388 -0.21875 ) )
( ( 5288 1416 1048 3.061691761 0 ) ( 5288 1416 1076 3.061691761 -0.109375 ) ( 5288 1416 1104 3.061691761 -0.21875 ) )
( ( 5320 1440 1056 3.2210359573 0 ) ( 5320 1440 1076 3.2210359573 -0.109375 ) ( 5320 1440 1104 3.2210359573 -0.21875 ) )
( ( 5352 1464 1064 3.3803803921 0 ) ( 5352 1464 1076 3.3803803921 -0.109375 ) ( 5352 1464 1104 3.3803803921 -0.21875 ) )
( ( 5416 1464 1064 3.6303803921 0 ) ( 5416 1464 1076 3.6303803921 -0.109375 ) ( 5416 1464 1104 3.6303803921 -0.21875 ) )
( ( 5480 1464 1064 3.8803803921 0 ) ( 5480 1464 1076 3.8803803921 -0.109375 ) ( 5480 1464 1104 3.8803803921 -0.21875 ) )
( ( 5512 1440 1056 4.0397248268 0 ) ( 5512 1440 1076 4.0397248268 -0.109375 ) ( 5512 1440 1104 4.0397248268 -0.21875 ) )
( ( 5544 1416 1048 4.1990690231 0 ) ( 5544 1416 1076 4.1990690231 -0.109375 ) ( 5544 1416 1104 4.1990690231 -0.21875 ) )
( ( 5576 1408 1048 4.3279161453 0 ) ( 5576 1408 1076 4.3279161453 -0.109375 ) ( 5576 1408 1104 4.3279161453 -0.21875 ) )
( ( 5608 1400 1048 4.4567632675 0 ) ( 5608 1400 1076 4.4567632675 -0.109375 ) ( 5608 1400 1104 4.4567632675 -0.21875 ) )
( ( 5656 1400 1048 4.6442632675 0 ) ( 5656 1400 1076 4.6442632675 -0.109375 ) ( 5656 1400 1104 4.6442632675 -0.21875 ) )
( ( 5696 1400 1048 4.8005132675 0 ) ( 5696 1400 1076 4.8005132675 -0.109375 ) ( 5696 1400 1104 4.8005132675 -0.21875 ) )
( ( 5728 1432 1048 4.9772896767 0 ) ( 5728 1432 1076 4.9772896767 -0.109375 ) ( 5728 1432 1104 4.9772896767 -0.21875 ) )
( ( 5768 1472 1048 5.1982607841 0 ) ( 5768 1472 1076 5.1982607841 -0.109375 ) ( 5768 1472 1104 5.1982607841 -0.21875 ) )
( ( 5768 1648 1048 5.8857607841 0 ) ( 5768 1648 1076 5.8857607841 -0.109375 ) ( 5768 1648 1104 5.8857607841 -0.21875 ) )
( ( 5768 2000 1048 7.2607607841 0 ) ( 5768 2000 1076 7.2607607841 -0.109375 ) ( 5768 2000 1104 7.2607607841 -0.21875 ) )
)
}
}
NetRadiant
Opened the map in NetRadiant. Filtered patches from the view. Selected everything and copied it in another NetRadiant file. Saved the map as <mapname_nopatch>
GtkRadiant 1.5.0
Opened <mapname_nopatch>. No error. Works like a charm.
GtkRadiant 1.6.4
Opened <mapname_nopatch>. No error. Works like a charm.
[HR][/HR]
Conclusion: Those patches are “merged” patches. NetRadiant provides the possibility to merge several patches into one when they fulfill certain criteria.
GtkRadiant seems to struggle with those patches.
“Fix”:If you change the patches one by one, you might not know which patch you modified later-on.
That could leave you with several “corrupted/duplicated” patches.
Step#1: Rename you current map-file to <mapname_backup>. Do that in the explorer and NOT in radiant as that might screw your targetnames etc. I’ve encountered that problem before!
Step#2: Delete ALL patches from <mapname> and save it
Step#3: Rename <mapname> to <mapname_nopatch>. Do that in the explorer and NOT in radiant as that might screw your targetnames etc. I’ve encountered that problem before!
Step#4: Copy ALL patches from <mapname_backup> into a new mapfile and save it as <mapname_patch>.
Step#4.1If you have patches with targetnames: Copy/Paste <mapname_backup> in the explorer. Open <mapname_backup_copy> in radiant. Hide everything except patches and select ALL of them. Unhide EVERYTHING and invert the selection (EDIT > INVERT SELECTION). Now hit delete and save. Go to explorer and rename <mapname_backup_copy> to <mapname_patch>
Step#5: Check the <mapname_patch> for “corrupted” patches like I did above and delete all “corrupted” patches.
Step#6: Import <mapname_patch> into <mapname_nopatch> and replace missing patches
>> The problem in your case might be a completely different one. Just run a debug-process like I did above and check what GtkRadiant gives you as error messages. Please post here for future reference!!
Regards